Always here, Always available
+1 410-604-2900
Get in Touch

Quote Request List

Go to List

UV Reflectors

I600 | Reflector | Cold Mirror

This Cold Mirror reflector kit is specified for the model I600E product family which is the original “English” model of the I600 lamp. Miltec’s Cold Mirror reflector will absorb the unwanted infrared (IR) energy, which removes virtually all of the focused IR on the work surface to minimize the heat load on the substrate. The other major benefit of Miltec’s Cold Mirror reflector is its extremely high UV reflectivity in the UVA, UVB, and UVC range. Therefore, cure speeds will not be hampered when choosing this reflector for your heat sensitive applications.

Part #380-00436 (Same as 380-00435 but Includes Cold Mirror end plates)

Benefits and Features
  • Direct replacement for Heraeus Part #527314
  • Performs equal to or better than OEM’s product for IR absorptivity and UV reflectivity
  • Competitively priced

Specifications
  • Cold Mirror Milcure MD reflector kit replaces OEM’s Cold/R500 reflector kits
  • Used in 600 W/inch (236.22 W/cm) microwave powered 10 inch (25.4 cm) UV systems
  • Each reflector kit includes the cold mirror main reflector, a pair of Cold Mirror end reflectors, (8) countersunk mounting screws, complete set of metal gasket strips, and installation instructions
  • Compatible with 8-screw type RF screen
  • Compatible with Miltec’s “quick release” type RF screen only. Quick Release feature not available with this product.
  • Specified for the following OEM lamp housing models: “English” version of I600 lamps (or I600E)
  • Warranty matches OEM warranty
Add to Quote Request
Don’t see exactly what you’re looking for? Contact us

SALES AND TECHNICAL SUPPORT

One number. Everything you need.

If you’d like to place an order, have questions about our products, or need technical support,
we are just a phone call away:

+1 410-604-2900

Headquarters

146 Log Canoe Circle
Stevensville, Maryland 21666 USA

Support

Phone: +1 410-604-2900
Email: service@miltec.com

After Hours Technical Support
(5 pm – 8 am EST) (GMT -5):

+1 443-591-2326

Sales

Phone: +1 410-604-2900
Fax: (+1) 410-604-2906
Email: sales@miltec.com

Made in USA

Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography

©2024 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions