Always here, Always available
+1 410-604-2900
Quote Request List
10
The latest from
Miltec.
-
Optical Fiber | F6/F10 | Cold Mirror | End Reflector Kit
For Optical Fiber Back Reflectors Only. This is the cold mirror version of the 380-00707 end reflector. It is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes one pair of cold mirror end reflectors. The end reflectors can be purchased separately from the back reflector..
-
Optical Fiber | F6/F10 | End Reflector Kit
For Optical Fiber Back Reflectors Only. This end reflector kit is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes one pair of end reflectors. These end reflectors are included in the cold mirror (cold/cold configuration) reflector kits that Miltec supplies for these UV systems. However,…
-
Reflector | Cold Mirror | End Pair
This is the Cold Mirror end reflector kit that is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes one pair of cold mirror end reflectors. These end reflectors are included in the cold mirror (cold/cold configuration) reflector kits that Miltec supplies for these UV systems.…
-
Reflector | M500 | 2-hole | End Pair
This is the 2-hole end reflector kit that is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes a One pair of end reflectors. Each end reflector has two small holes that allow two different UV bulb positions: focused and non-focused. Part #380-00703
-
Reflector | M500 | 2.1 | End Pair
This is the end reflector kit that is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes a one pair of end reflectors. These are the same end reflectors that are included in the reflector kits that Miltec UV supplies. However, the end reflectors can be…
-
Optical Fiber | F10T2 | Reflector | No Backstrip | Vented
This model F10T2 reflector without back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The F10T2 differs from the F10 in that it allows you to remove the back reflector from the lamp without removing the quartz tube. The vented reflector is commonly used with 600…
-
Optical Fiber | F10T2 | Reflector | Backstrip | Vented
This model F10T2 reflector with back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The F10T2 differs from the F10 in that it allows you to remove the back reflector from the lamp without removing the quartz tube. The vented reflector is commonly used with 600…
-
Optical Fiber | F10T | Reflector | No Backstrip | No Vent
This model F10T reflector without back strip is the “non-vented” configuration for use in the back reflector housing for optical fiber curing applications. The non-vented reflector is commonly used with 300 or 375 W/inch (118.11 or 147.64 W/cm) UV lamp systems.
-
Optical Fiber | F10T | Reflector | Backstrip | No Vent
This model F10T reflector with backstrip is the “non-vented” configuration for use in the back reflector housing for optical fiber curing applications. The non-vented reflector is commonly used with 300 or 375 W/inch (118.11 or 147.64 W/cm) UV lamp systems.
Our Team
Our people set us apart.
Our friendly team of experts is always here to help.
Count on them for solutions, ideas, support, and guidance.
Headquarters
146 Log Canoe Circle
Stevensville, Maryland 21666 USA
Support
Phone: +1 410-604-2900
Email: service@miltec.com
After Hours Technical Support
(5 pm – 8 am EST) (GMT -5):
+1 443-591-2326
Sales
Phone: +1 410-604-2900
Fax: (+1) 410-604-2906
Email: sales@miltec.com
Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography
©2024 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions