Always here, Always available
+1 410-604-2900
Quote Request List
Heraeus
The latest from
Miltec.
-
Reflector Gasket Kit | I250/I600M
Part #380-80252
-
Optical Fiber | F6 | Gasket Kit
This model F6 reflector without back strip is specified for the back reflector housing which couples to a 6 inch (15.24 cm) microwave powered UV lamp configured for optical fiber curing applications. The F6 back reflector assembly is used with OEM models: F300S (6 inch 300 W/inch (15.24 cm 118.11 W/cm) system), F500 (6 inch…
-
Reflector Gasket Kit | F10
This is the orange rubber gasket kit that is used with the F10T back reflector. This kit includes a set of pre-cut gaskets to fit onto the rim of the F10T to help ensure a good “light tight” sealing of the F10T reflector housing to the 10 inch (25.4 cm) lamp housing. Miltec’s gaskets are…
-
Optical Fiber | F10T | Cold Mirror | End Reflector | 40mm
For Optical Fiber Back Reflectors Only. This is the Cold Mirror version of the 380-00709 end reflector. It is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes one pair of cold mirror end reflectors. The end reflectors can be purchased separately from the back reflector..
-
Optical Fiber | F10T | End Reflector | w/Bend
For Optical Fiber Back Reflectors Only. This end reflector kit is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes one pair of end reflectors. These end reflectors are included in the cold mirror (cold/cold configuration) reflector kits that Miltec supplies for these UV systems. However,…
-
Optical Fiber | F6/F10 | Cold Mirror | End Reflector Kit
For Optical Fiber Back Reflectors Only. This is the cold mirror version of the 380-00707 end reflector. It is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes one pair of cold mirror end reflectors. The end reflectors can be purchased separately from the back reflector..
-
Optical Fiber | F6/F10 | End Reflector Kit
For Optical Fiber Back Reflectors Only. This end reflector kit is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes one pair of end reflectors. These end reflectors are included in the cold mirror (cold/cold configuration) reflector kits that Miltec supplies for these UV systems. However,…
-
Reflector | Cold Mirror | End Pair
This is the Cold Mirror end reflector kit that is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes one pair of cold mirror end reflectors. These end reflectors are included in the cold mirror (cold/cold configuration) reflector kits that Miltec supplies for these UV systems.…
-
Reflector | M500 | 2-hole | End Pair
This is the 2-hole end reflector kit that is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes a One pair of end reflectors. Each end reflector has two small holes that allow two different UV bulb positions: focused and non-focused. Part #380-00703
Our Team
Our people set us apart.
Our friendly team of experts is always here to help.
Count on them for solutions, ideas, support, and guidance.
Headquarters
146 Log Canoe Circle
Stevensville, Maryland 21666 USA
Support
Phone: +1 410-604-2900
Email: service@miltec.com
After Hours Technical Support
(5 pm – 8 am EST) (GMT -5):
+1 443-591-2326
Sales
Phone: +1 410-604-2900
Fax: (+1) 410-604-2906
Email: sales@miltec.com
Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography
©2024 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions