Always here, Always available
+1 410-604-2900
Quote Request List
Heraeus
The latest from
Miltec.
-
Reflector | M500 | 2.1 | End Pair
This is the end reflector kit that is used for 6 inch (15.24 cm) and 10 inch (25.4 cm) microwave powered UV systems. This kit includes a one pair of end reflectors. These are the same end reflectors that are included in the reflector kits that Miltec UV supplies. However, the end reflectors can be…
-
Optical Fiber | F6 | Reflector | Backstrip Kit
This model F6 reflector with back strip is specified for the back reflector housing which couples to a 6 inch (15.24 cm) microwave powered UV lamp configured for optical fiber curing applications. The F6 back reflector assembly is used with OEM models: F300S (6 inch 300 W/inch (15.24 cm 118.11 W/cm) system), F500 (6 inch…
-
Optical Fiber | F10T2 | Reflector | No Backstrip | Vented
This model F10T2 reflector without back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The F10T2 differs from the F10 in that it allows you to remove the back reflector from the lamp without removing the quartz tube. The vented reflector is commonly used with 600…
-
Optical Fiber | F10T2 | Reflector | Backstrip | Vented
This model F10T2 reflector with back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The F10T2 differs from the F10 in that it allows you to remove the back reflector from the lamp without removing the quartz tube. The vented reflector is commonly used with 600…
-
Optical Fiber | F10T | Reflector | No Backstrip | No Vent
This model F10T reflector without back strip is the “non-vented” configuration for use in the back reflector housing for optical fiber curing applications. The non-vented reflector is commonly used with 300 or 375 W/inch (118.11 or 147.64 W/cm) UV lamp systems.
-
Optical Fiber | F10T | Reflector | Backstrip | No Vent
This model F10T reflector with backstrip is the “non-vented” configuration for use in the back reflector housing for optical fiber curing applications. The non-vented reflector is commonly used with 300 or 375 W/inch (118.11 or 147.64 W/cm) UV lamp systems.
-
Optical Fiber | F10T | Reflector | No Backstrip | Vented
This model F10T reflector without back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The vented reflector is commonly used with 600 W/inch (236.22 W/cm) microwave powered UV lamp systems, but can also be used with the 300 or 375 W/inch (118.11 or 147.64 W/cm) microwave…
-
Optical Fiber | F10T | Reflector | Backstrip | Vented
This model F10T reflector with back strip is the “vented” configuration for use in the back reflector housing for optical fiber curing applications. The vented reflector is commonly used with 600 W/inch (236.22 W/cm) microwave powered UV lamp systems, but can also be used with the 300 or 375 W/inch (118.11 or 147.64 W/cm) microwave…
-
I6 | Reflector | Cold Mirror | 6″
This Cold Mirror reflector kit is specified for the model I6 product family. Miltec’s Cold Mirror reflector will absorb the unwanted infrared (IR) energy, which removes virtually all of the focused IR on the work surface to minimize the heat load on the substrate. The other major benefit of Miltec’s Cold Mirror reflector is its…
Our Team
Our people set us apart.
Our friendly team of experts is always here to help.
Count on them for solutions, ideas, support, and guidance.
Headquarters
146 Log Canoe Circle
Stevensville, Maryland 21666 USA
Support
Phone: +1 410-604-2900
Email: service@miltec.com
After Hours Technical Support
(5 pm – 8 am EST) (GMT -5):
+1 443-591-2326
Sales
Phone: +1 410-604-2900
Fax: (+1) 410-604-2906
Email: sales@miltec.com
Photography by David Bohrer, National Assoc. of Manufacturers and Gary Landsman, Gary Landsman Photography
©2024 Miltec UV. All Rights Reserved. Privacy Policy / Terms and Conditions